Products
Product Series
PRODUCTS SERIES
CW Series Engine Lathe
CW61126
MODEL:CW61126 CW61146 CW61166 CW61186 CW61206
SWING Φ1260mm Φ1460mm Φ1660mm Φ1860mm Φ2060mm
Category: CW Series Engine Lathe
Specifications
| Model.No | CW61126 | CW61146 | CW61166 | CW61186 | CW61206 |
| CAPACITY | |||||
| Max.swing over bed | 1260mm | 1460mm | 1660mm | 1860mm | 2060mm |
| Max.swing over cross slide | 760mm | 960mm | 1160mm | 1360mm | 1560mm |
| Distance between centers | 3m,4m,5m,6m,8m,10m,12m | ||||
| Width of bed | 1180mm | ||||
| Max.weight of workpiece | 20T | ||||
| HEADSTOCK | |||||
| Spindle hole | φ105mm | ||||
| Spindle taper | φ140mm 1:7 | ||||
| Spindle speeds | 3-24;6-48;12-96;24-200 | ||||
| GEAR BOX-THREADS&FEEDS | 3.15-315r/min 2-200r/mm 2.5-250r/mm | ||||
| Metric threads range(pitch) | |||||
| Inch threads TPI(inch) | 1-60mm | ||||
| Longitudinal feeds range | 1/2-30 | ||||
| Cross feed rang | 0.1-6mm | ||||
| Rapid feed:long/cross | 0.05-3mm | ||||
| TOOL-POST | 3400mm/min,1700mm/min | ||||
| Tool section | |||||
| CARRIAGE | 45x45mm | ||||
| Cross slide travel | |||||
| Compound rest travel | 700mm | 800mm | |||
| TAILSTOCK | 280mm | ||||
| Sleeve diameter | |||||
| Sleeve taper | 280mm | ||||
| Sleeve travel | 100mm 1:7 | ||||
| STEADY REST | 300mm | ||||
| Close-type steady rest | |||||
| Open-type steady rest | φ250-600mm | ||||
| MOTOR | φ450-780mm φ550-1200mm | ||||
| Main motor | |||||
| Rapid feed motor | DC 55kw | ||||
| Tailstock motor | 1.5kw | ||||
| Net weight(kg)Dimention | 1.5kw | ||||
| (LxWxH)Center distance | |||||
|
|
2000 | 21000kg | 7150×2200×1850 | ||
| 3000 | 22500kg | 8150×2200×1850 | |||
| 4000 | 24000kg | 9150×2200×1850 | |||
| 5000 | 25500kg | 10150×2200×1850 | |||
| 6000 | 27000kg | 11150×2200×1850 | |||
| 8000 | 30000kg | 13150×2200×1850 | |||
| 10000 | 33000kg | 15150×2200×1850 | |||
| 12000 | 36000kg | 17150×2200×1850 | |||
Keyowrds: CW Series Engine Lathe
Previous page
Next page
Phone:
Email:
Jiangsu Feiya was established in 1985 and has over 30 years of experience in manufacturing machine tools to date.
The old factory covers an area of 35,000 square meters, of which 15,000 square meters is dedicated to factory buildings. The new factory was completed in 2006 and covers an area of 72,000 square meters, with 40,000 square meters allocated to factory buildings.
HUATAO GROUP
Online Message
If you have any questions about us or our products, feel free to leave us a message at any time.