Products
Product Series
PRODUCTS SERIES
CW Series Engine Lathe
CW61128
MODEL:CW61128 CW61148 CW61168 CW61198 CW61208
SWINGΦ1280mm @1480mm @1680mmΦ1980mm Φ2080mm
Category: CW Series Engine Lathe
Specifications
| Model.No | CW61128 | CW61148 | CW61168 | CW61198 | CW61208 |
| Max workpiece weight | 12T | ||||
| Max.swing over bed | 1280mm | 1480mm | 1680mm | 1980mm | 2080mm |
| Max.swing over cross slide | 800mm | 1000mm | 1200mm | 1500mm | 1600mm |
| Distance between centers | 2m,3m,4m,5m,6m,8m,10m,12m | ||||
| Max swing over gap | 1580mm | 1780mm | 1980mm | 2280mm | 2380mm |
| Bed wicth | 1100mm | ||||
| HEADSTOCK | |||||
| Spindle bore | φ130mm | ||||
| Spindle taper | 140# | ||||
| Spindle speeds | 2.5-250r/mm | ||||
| GEAR BOX-THREADS&FEEDS | |||||
| Metric threads range | 441-120mm | ||||
| Inch threads TPI | 311/4-24 | ||||
| Moudle theads range | 450.5-60mm | ||||
| Diametral threads range | 381/2-56DP | ||||
| Longitudinal feeds range | 560.1-12mm | ||||
| Cross feed rang | 560.05-6mm | ||||
| Rapid feed:long/cross | 3400mm/min,1700mm/min | ||||
| TOOL-POST | |||||
| Distance between Center&Tool | 48mm | ||||
| Tool section | 45×45mm | ||||
| CARRIAGE | |||||
| Cross slide travel | 860mm | ||||
| Compound rest travel | 280mm | ||||
| TAILSTOCK | |||||
| Sleeve diameter | φ260mm | ||||
| Sleeve taper | 80# | ||||
| Sleeve travel | 300mm | ||||
| MOTOR | |||||
| Main drive motor | 30kw | ||||
| Coolant pump motor | 0.15kw | ||||
| Rapid feed motor | 1.5kw | ||||
| Tailstock motor | 1.5kw | ||||
| Distance between centers:Net | 2000 | 16800kg | 5280×2200×2600 | ||
| weight Dimenton CW61148 | 3000 | 18300kg | 6280×2200×2600 | ||
| 4000 | 20000kg | 7280×2200×2600 | |||
| 5000 | 21500kg | 8280×2200×2600 | |||
| 6000 | 23000kg | 9280x2200×2600 | |||
| 8000 | 26000kg | 11280×2200×2600 | |||
| 10000 | 29000kg | 13280x2200×2600 | |||
| 12000 | 32000kg | 15280x2200×2600 | |||
Keyowrds: CW Series Engine Lathe
Previous page
Next page
Phone:
Email:
Jiangsu Feiya was established in 1985 and has over 30 years of experience in manufacturing machine tools to date.
The old factory covers an area of 35,000 square meters, of which 15,000 square meters is dedicated to factory buildings. The new factory was completed in 2006 and covers an area of 72,000 square meters, with 40,000 square meters allocated to factory buildings.
HUATAO GROUP
Online Message
If you have any questions about us or our products, feel free to leave us a message at any time.