Products
Product Series
PRODUCTS SERIES
CW Series Engine Lathe
CW6263
● The guide surface hardended by surper-frequency and precision ground
● All gears hardended & preclsion ground
● Spindle with high rigltlay and accuracy
● Rapid feed structure in apron
● Aaopt clutcn system in headstock
Category: CW Series Engine Lathe
Specifications
| MODEL | CW6263 | CW6280(A) | CW62100(A) | CW62120(A) |
| CAPACITY | ||||
| Max.swing over bed | 630mm | 800mm | 1000mm | 1200mm |
| Max.swing over gap | 830mm | 1000mm | 1200mm | 1400mm |
| Max.swing over cross slide | 345mm | 480mm | 680mm | 880mm |
| Distance between centers | 1000~12000mm | |||
| Width of bed | 600mm | |||
| HEADSTOCK | ||||
| Spindle hole | φ105mm (φ130mm) | |||
| Spindle taper | ①20mm 1:20120mm(140mm) | |||
| Spindle speeds | 7.5-1000r/min | 5.5-730r/min(18) | ||
| GEAR BOX-THREADS&FEEDS | ||||
| Metric threads mm | 1-240mm(52) | |||
| Inch threads TPI | 1-14 (26) | |||
| Moudle theads mm | 0.5-120mm(53) | |||
| Diametral threads DP | 1-28 (24) | |||
| Longitudinal feeds range | 0.1-24.3mm/r | |||
| Cross feed rang | 0.05-12.15mm/r | |||
| Rapid feed:long/cross | 4000mm/min,2000mm/min | |||
| TOOL-POST | ||||
| Tool section | 32x32mm | |||
| CARRIAGE | ||||
| Cross slide travel | 370mm | |||
| Compound rest travel | 200mm | |||
| TAILSTOCK | ||||
| Spindle diameter | φ100mm | Φ120mm | ||
| Spindle taper | MORES60 | |||
| Spindle travel | 240mm | |||
| STEADY REST | ||||
| Steady rest | φ20-200mm | |||
| Follow rest | φ20-135mm | |||
| MOTOR | ||||
| Main motor | 11kw(15kw) | |||
| Rapid feed moto | 1.1kw | |||
| CW6163.NET weight(kg)rDimention(LxWxH) | 1000mm | 4600kg | 3000×1170x1250mm | |
| 1500mm | 5000kg | 3500×1170×1250mm | ||
| 2000mm | 5200kg | 4000×1170x1250mm | ||
| 3000mm | 5800kg | 5000×1170x1250mm | ||
| 4000mm | 6400kg | 6000×1170x1250mm | ||
| 5000mm | 7000kg | 7000×1170x1250mm | ||
| 6000mm | 7600kg | 8000×1170x1250mm | ||
| 8000mm | 9000kg | 10000×1170x1250mm | ||
| 102000mm | 10400kg | 12000×1170x1250mm | ||
| 12000mm | 11700kg | 14000×1170x1250mm | ||
Keyowrds: CW Series Engine Lathe
Previous page
Next page
Phone:
Email:
Jiangsu Feiya was established in 1985 and has over 30 years of experience in manufacturing machine tools to date.
The old factory covers an area of 35,000 square meters, of which 15,000 square meters is dedicated to factory buildings. The new factory was completed in 2006 and covers an area of 72,000 square meters, with 40,000 square meters allocated to factory buildings.
HUATAO GROUP
Online Message
If you have any questions about us or our products, feel free to leave us a message at any time.