Products
Product Series
PRODUCTS SERIES
CWZ Precision Lathe
CWZ61160
MODEL:CWZ61160 CWZ61180 CWZ61200 CWZ61220 CWZ61240 CWZ61250
SWING Φ1600mm Φ1800mm Φ2000mm Φ2200mm Φ2400mm Φ2500mm
Category: CWZ Precision Lathe
Specifications
| Model No. | CWZ61160 | CWZ61180 | CWZ61200 | CW61220 | CW611240 | CW611250 |
| CAPACITY | ||||||
| Max.swing over bed | 1600mm | 1800mm | 2000mm | 2200mm | 2400mm | 2500mm |
| Max.swing over cross slide | 1250mm | 1450mm | 1650mm | 1850mm | 2050mm | 2150mm |
| Distance between centers | 3m,4m,5m,6m,8m,10m,12m,16m | |||||
| Max.weight of workpiece | 32T/40T/63T/ | |||||
| Width of bed | 1600mm/2100mm | |||||
| HEADSTOCK | ||||||
| Spindle hole | φ85mm | |||||
| Spindle taperr | φ120mm 1:7 | |||||
| Spindle speeds | (0.8-18)(2.4-54)(7.2-160)r/min | |||||
| GEAR BOX-THREADS&FEEDS | ||||||
| Metric threads range(pitch) | 2-40mm | |||||
| Inch threads TPI(inch) | 1-14 | |||||
| Worm gear threads range(module) | 1.5-20mm | |||||
| Longitudinal feeds range | 0.125-45mm/ | |||||
| Cross feed range | 0.063-24mm/ | |||||
| Rapld feed :long/cross | 3000mm/min,1500mm/min | |||||
| TOOL-POST | ||||||
| Tool section | 70x70mm | |||||
| CARRIAGE | ||||||
| Cross slide travel | 725mm | |||||
| Middle slide travel | 600mm | |||||
| TAILSTOCK | ||||||
| Sleeve diameter | 300mm | |||||
| Sleeve taper | 100mm 1:7 | |||||
| Sleeve travel | 300mm | |||||
| STEADY REST | ||||||
| Close-type steady rest | φ400-750mm | |||||
| Open-type steady rest | φ650-1200mm | |||||
| MOTOR | ||||||
| Main motor | 80/110kw | |||||
| Rapid feed motor | 1.5kw | |||||
| Tailstock motor | 1.5kw | |||||
| Net weight(kg)Dimention | 3000mm | 37500kg | 8577×2480×2280 | |||
| (LxW×H)Center distance | 4000mm | 39000kg | 9577×2480×2280 | |||
| 5000mm | 40500kg | 10577×2480×2280 | ||||
| 6000mm | 42000kg | 11577×2480×2280 | ||||
| 8000mm | 45000kg | 13577×2480×2280 | ||||
| 10000mm | 48000kg | 15577×2480×2280 | ||||
| 12000mm | 52000kg | 17577×2480×2280 | ||||
| 16000mm | 58000kg | 21577×2480×2280 | ||||
Keyowrds: CWZ Precision Lathe
Phone:
Email:
Jiangsu Feiya was established in 1985 and has over 30 years of experience in manufacturing machine tools to date.
The old factory covers an area of 35,000 square meters, of which 15,000 square meters is dedicated to factory buildings. The new factory was completed in 2006 and covers an area of 72,000 square meters, with 40,000 square meters allocated to factory buildings.
HUATAO GROUP
Online Message
If you have any questions about us or our products, feel free to leave us a message at any time.